www.pic16.net

    Jointly build a harmonious learning environment

Download

Forum

Years of development experiences Months of hard design work

QL200 PIC Development Board for Microchip PIC16/18XXX

Demo board for PIC Microcontroller with the highest cost performance


 

   QL200 is an integrated demo system for study and development of PIC Microcontroller, which is provided with four functions of experimental instrument, programmer, simulation interface and ISCP download cable. Enclosed with control CPU and combined with programming software which has independent intellectual property rights, the system is able to support over 90 percent of the experiments and development practices of PIC Microcontroller.

   To easily study and develop all series of PIC Microcontrollers, only a set of QL200 demo system and a computer are needed. Based on programming functions, abundant on-board hardware resources, flexible expansion, free resource distribution, and ICSP download function for customer target board, QL200 can not only satisfy the demands of a beginner in Microcontroller study, but also meet the requirements of engineers in development of Microcontroller. In addition to a study & experimental board, QL200 is also a demo board of Microcontroller integrated with multiple resources.


 On-board resources:

QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board
  RS-232 communication for connection with a PC or any other device with a DB9 connector.(use DuPont wire can be connected to the arbitrary I/O port)  Stepper motor driver circuit(use DuPont wire can be connected to the arbitrary I/O port)(remark: Setpper motor is optional).   24 LEDs are provided. 每 to connect optionally with the port RA, RB and RC of Microcontroller for indication of output high/low level at I/O port.(use DuPont wire can be connected to the arbitrary I/O port)   MMC\SD card slot - For MMC\SD memory cards. Used for data acquisition.(use DuPont wire can be connected to the arbitrary I/O port)(remark: MMC\SD card is optional).
QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board
DS1302 clock 每 enclosed with battery with memory capacity.(use DuPont wire can be connected to the arbitrary I/O port) ICD2 connector for customers who want to use it. 每 to directly connect ICD1/ICD2/MCD1/MCD2 and carry out on-line simulation for on-board chips and resources.   2 Potentionmeters for simulating analog voltage input.(use DuPont wire can be connected to the arbitrary I/O port)   PIC Microcontroller chip socket 每 including 8PIN, 14PIN, 18PIN, 20PIN, 28PIN, 40PIN, PIC10 series, and PIC16F57 special socket.(including PIC10XX,PIC12XX, PIC16XX,PIC18XX socket)
QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board
  EEPROM of 93CXX with hardware SPI or software analog SPI,to select 8-bit or 16-bit read/write method through jumper.(use DuPont wire can be connected to the arbitrary I/O port)   Digital thermometer DS1820 for measuring temperature from -55oC to 125oC.(use DuPont wire can be connected to the arbitrary I/O port)(remarkㄩ chip DS18B20 is optional).   Serial 10-bit voltage DA converter每 TLC5615 chip, direct digital-to-analog converter, on-board analog output interface .(use DuPont wire can be connected to the arbitrary I/O port) (remarkㄩ chip TLC5615 is optional). IIC (I2C) communication 每 to read/write 24CXX series chips with hardware IIC or software IIC directly. (use DuPont wire can be connected to the arbitrary I/O port)
QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board

  Infrared remote-control receiver 每 to practice infrared remote-control decoding and all kinds of infrared remote control.(use DuPont wire can be connected to the arbitrary I/O port)

  Buzzer voice/PWM output experiment 每 to practice normal voice, music and PWM output sound.(use DuPont wire can be connected to the arbitrary I/O port)   Clock selection 每 jumper for switch between various oscillation modes, to replace crystal vibration of different frequency as required by development of product.   4*4 Matrix keyboard 每 to test password lock and other items.(use DuPont wire can be connected to the arbitrary I/O port)
QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board

  All pins are taken out on IDC10 connectors to make them available for further connections.

  8-buttons are provided 每 for easy various key-press input experiments and jumper setup for pull-up or pull-down of port hardware.(use DuPont wire can be connected to the arbitrary I/O port)

  On-board power module 每 Power Supply select - USB or external. Also there is a switch for turning on/off system..

  On-board programming module 每 to communicate with computer through USB, adaptable for any kind of computer

QL200 PIC Development Board QL200 PIC Development Board QL200 PIC Development Board
  12864- Graphic LCD每128*64 lattices.(use DuPont wire can be connected to the arbitrary I/O port)(remarkㄩ 12864- character LCD is optional).   1602-character LCD每internal 5*7 lattices, to display 16*2-character.(use DuPont wire can be connected to the arbitrary I/O port)   6bit 7-segment digital tube 每 to realize dynamic or static display experiment of digital tube, to display clock,temperature or to make counter.(use DuPont wire can be connected to the arbitrary I/O port)

 Characteristics:

   Abundant on-board resourcesㄩ LED, digital tube, key-press, keyboard matrix, character LCD, graphic LCD, A/D converter, D/A converter, SPI & IIC communication, USART serial communication, DS18B20 digital temperature measurement, DS1302 clock, infrared remote control encoder, voice program and etc.
   Full combination of PIC chips available for programming supporting and experiment developmentㄩ on-board chip socket for PIC Microcontroller of 8PIN, 14PIN, 18PIN, 20PIN,      28PIN, and 40PIN, on-board PIC10 series, PIC16F57 chip socket, jumper for selection of various oscillation modes, auto-replacement of crystal oscillation of different frequency.
   Open modular designㄩ All modules can be on/off controlled by DIP switch. Each module is designed to connect to I/O port of Microcontroller. Connection of module with any port of Microcontroller is conveniently achieved through dupont thread. Connection to preset port is available by using DIP switch without dupont thread. All I/O ports are open externally with output socket. Expansion is easily accomplished.
   Perfect examplesㄩ Each module is equipped with at least one detailed example from easy ones to complicated ones. Beginners are enabled to master all types of programming step by step.
   Powerful on-board programming systemㄩ Programming over 90 percent of PIC Microcontrollers. Enclosed with ICSP download cable. Direct ICSP programming for Microcontroller of external target board.
   On-board simulation debugging interfaceㄩ direct connection to ICD1/ICD2/MCD1/MCD2 in circuit debugger.

Powerful programming control softwareㄩ
Programming control software has entire independent intellectual property rights and covers all operating functions of programmer, with the following characteristicsㄩ
   1﹜Compatible for operating systems including Windows 98, Windows 2000/NT, Windows XP and Windows 2003;
   2﹜Programming interface in English and Chinese, on-line help system, convenient for user operation;
   3﹜Programming counting function of software;
   4﹜Serial number auto-increment function;
   5﹜Voice indication during programming;
   6﹜Auto-inspection of programming hardware, auto-inspection of software and setup of programming hardware during start-up, operation without manual setup;
   7﹜Monitoring of programming data; Based on check summing, available to find immediately if programming data is changed or not. Formula of checksum is subject to definition of Microchip;
   8﹜Read the content in chip programming area easily;
   9﹜Program supports *.HEX or *.BIN files;
   10﹜Fill function of buffer;
   11﹜Auto-protection of calibration value of chip clock against erasion;
   12﹜Directly program the BIN files obtained from decoding of Microcontroller without making any setup.

 In addition to above characteristics,many humanized functions are designed in the development of QL200,For examplesㄩ
   Over-load protection functionㄩ When there is over load in the demo system, the protection system will automatically start to avoid any damage of elements. After fault is corrected, the board will recover to work.
   Auto-load of changed file functionㄩ To achieve seamless integration with MPLAB IDE and other development software, the changed current target code is inspected automatically and then is transferred into the updated file automatically. This function offers great convenience for study and development, which avoids the trouble in repeating load of target code.
   Function to identify the figuration bit and EEPROM in the file automaticallyㄩ When we write the configuration bit information and EEPROM data in the program, otherwise setup is not needed for programming. This function saves much time for regular change in program debugging and avoids the setup requirement for each program change.
   On-board CPU on-line upgrade functionㄩ It is available to download the updated programming software and run to upgrade hardware, which will upgrade on-board CPU to the updated version so that it can support more new devices.


 QL200 can support the following devices for programming and experimental developmentㄩ

PIC10XXX
PIC10F200 PIC10F202 PIC10F204 PIC10F206 PIC10F220 PIC10F222
PIC12XXX
PIC12C508 PIC12C508A PIC12C509 PIC12C509A PIC12C671 PIC12C672 PIC12CE518
PIC12CE519 PIC12CE673 PIC12CE674 PIC12F508 PIC12F509 PIC12F629 PIC12F635
PIC12F675 PIC12F683 PIC12F615 PIC12HV615
PIC16XXX
PIC16C505 PIC16C554 PIC16C558 PIC16C61 PIC16C62 PIC16C62A PIC16C62B
PIC16C62A PIC16C62B PIC16C63 PIC16C63A PIC16C64 PIC16C64A PIC16C65
PIC16C65A PIC16C65B PIC16C66 PIC16C66A PIC16C67 PIC16C620 PIC16C620A
PIC16C621 PIC16C621A PIC16C622 PIC16C622A PIC16C71 PIC16C72 PIC16C72A
PIC16C73 PIC16C73A PIC16C73B PIC16C74 PIC16C74A PIC16C74B PIC16C76
PIC16C77 PIC16C710 PIC16C711 PIC16C712 PIC16C716 PIC16C745 PIC16C765
PIC16C773 PIC16C774 PIC16C83 PIC16C84 PIC16F505 PIC16F506 PIC16F54
PIC16F57 PIC16F627 PIC16F616 PIC16HV616 PIC16LF627A PIC16F627A PIC16F628
PIC16F628A PIC16LF628A PIC16F630 PIC16F636 PIC16F639 PIC16F648A PIC16F676
PIC16F683 PIC16F684 PIC16F685 PIC16F687 PIC16F688 PIC16F689 PIC16F690
PIC16F716 PIC16F72 PIC16F73 PIC16F74 PIC16F76 PIC16F77 PIC16F737
PIC16F747 PIC16F767 PIC16F777 PIC16F785 PIC16F83 PIC16F84 PIC16F84A
PIC16F87 PIC16F88 PIC16F818 PIC16F819 PIC16F870 PIC16F871 PIC16F872
PIC16F873 PIC16F873A PIC16F874 PIC16F874A PIC16F876 PIC16F876A PIC16F877
PIC16F877A PIC16F913 PIC16F914 PIC16F916 PIC16F917 PIC16F883 PIC16F884
PIC16F886 PIC16F887
PIC18XXX
PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448 PIC18F452
PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2221 PIC18F2320 PIC18F2321
PIC18F2331 PIC18F2410 PIC18F2420 PIC18F2431 PIC18F2450 PIC18F2455 PIC18F2480
PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2525 PIC18F2550 PIC18F2580 PIC18F2585
PIC18F2610 PIC18F2620 PIC18F2680 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321
PIC18F4331 PIC18F4410 PIC18F4420 PIC18F4431 PIC18F4450 PIC18F4455 PIC18F4480
PIC18F4510 PIC18F4515 PIC18F4520 PIC18F4525 PIC18F4550 PIC18F4580 PIC18F4585
PIC18F4610 PIC18F4620 PIC18F4680

 QL200 Software(English Version):

 QL200 PIC Development Board

 Board Resource Introduction:

 QL200 PIC Development Board

 1) Switch between power supply thru USB or external power supply.
 2) 128*64LCD and 16*2 LCD module.
 3) 32 LEDs are provided.
 4) 4x4 matrix keyboard module
 5) 8 buttons are provided.
 6) Potentionmeters for simulating analog voltage input.
 7) IIC (24C01/02 EEPROM)communication module.
 8) SPI (93C46 EEPROM)communication module.
 9) Real Time Clock DS1302 with battery supply.
 10) Reset circuit.
 11) ICD2 connector for customers who want to use it.
 12) On-board programming module (USB Communication).
 13) Chip socket and system clock selection.
 14) Digital LED display with 6bit 7-segment.
 15) Remote control receiver and decoder module.
 16) Digital thermometer DS1820 for temperature measurement from -55∼C to 125∼C.
 17) Beeper experimental module.
 18) RS-232 communication for connection with a PC or any other device with a DB9 connector.
 19) Serial 10-bit voltage DA (TLC5615) converter for applications in measure - regulating devices.
 20) All pins are taken out on IDC10 connectors to make them available for further connections.
 21) Stepper Motor Driver Module.
 22) SD/MMC card Read/Write Module.
 23) Free Chip PIC16F877A-I/P.


The auction includes:
  1. QL200 PIC Development Board * 1
  2. USB cable * 1
  3. ICSP cable * 1
  4. RS232 Cable * 1
  5. 16F877A Chip * 1
  6. 1602 LCD with backlight * 1
  7. Dupont thread expansion connection * 1 (20 wire)
  8. CD-ROM (Programmer Driver , English version PDF User manual ,QL200 Layout,QL200 Board Schematic , Sample code (C / ASM) , MPLAB 7.50 .)Compatible for OS including Windows 98, Windows 2000/NT, Windows XP , Windows 2003 and Vista


Payment methods 1: Direct remittance to PAYPAL

QL200 PIC Developmnet Board + DHL/UPS/FedEx/EMS Express US $135.00    ㄗAbout 5-7days

Increase 12864-character LCD Module Backlight US $14.00    

Increase QL1201 Universal Programming Module US $14.99    

Increase 10-bit D/A converter TLC5615 (DIP8) US $5.00    

Increase DS18B20 Temperature Sensor(TO-92) US $3.00    

Increase 2GB SanDISK SD Card US $10.00    

Increase Stepper motor US $5.00    

Increase PIC10F202-I/P(DIP8) US $2.00    

Increase PIC12F629-I/P(DIP8) US $2.00    

Increase PIC12F675-I/P(DIP8) US $2.00    

Increase PIC16F54(DIP18) US $2.00    

Increase PIC16F630(DIP14) US $2.00    

Increase PIC16F676(DIP14) US $2.00    

Increase PIC16F57(DIP28) US $2.50    

Increase PIC16F72(DIP28) US $2.50    

Increase PIC16F716(DIP18) US $2.50    

Increase PIC16F628A(DIP18) US $3.00    

Increase PIC16F84A(DIP18) US $3.00    

Increase PIC16F876A(DIP28) US $3.50    

Increase PIC16F877A(DIP40) US $4.50    

Increase PIC18F452(DIP40) US $6.00    

Procurement Description:
   Thank you for your order, please purchase product, tell us through the following E-mail: Your address, telephone number, contact person,
   My E-mail: qls@cxqmcu.com


Payment methods 2: My ebay shop --- http://stores.ebay.com/QLS-MCU-Development-TooL-Audio-DAC?_rdc=1


Payment methods 3:  BANK OF CHINA International Business:
  Remittance form:Remittance to our BANK OF CHINA account use U.S.dollars through local banks.
  Remittances cost:General remittances will be fixed at 25 dollars deducted, the total amount of remittances:The total amount of products + Shipping+ USD $25.00.
  The message witch provide to the local bank's:(To avoid making mistakes,You can put the following message to the bank staff,and ask he fill the forms for you )
  A/C NOㄩ4766938-0188-129144-0
  IN A/C WITHㄩTANG YAN
  BENE&S BANKㄩBANK OF CHINA SHENZHEN BEI FANG BUILDING SUB-BRANCH
  SWIFT CODEㄩBKCHCNBJ45A
  ADDㄩ1/F,BEI FANG BUILDING,SHEN NAN ZHONG ROAD,SHENZHEN,CHINA
  POST CODEㄩ518033


FAQ

Hi, if we buy now, when you shipped to me ?

  1﹜When we received you payment, we will sent the items to you within 1-2 work days !

You sent the items to me ,you have the tracking number for me ?

  1﹜If Shipping by Registered Air Mail, We will send you by Registered Air mail, This is have tracking number, and it can takes 7-20 working days.
  2﹜If Shipping by DHL/UPS/TNT/FedEx Express, We will send you by DHL/UPS/FedEX/TNT/EMS..Express, This is have provide Tracking number! and it can takes 3-7 working days !

If the item in the swap in the transport stolen, and you will be re-distributed to us?

  1﹜If you buy the parts, within the prescribed time did not receive goods, we will re-sent to you.
  2﹜For example, if shipping by Air Mail or Registered Air Mail, if you buy the parts on jaunary 1, you will received the parts on Jaunary 30 before, becuase it takes 7-20 working days, if you not received the parts on Jaunary 30 before, please tell me we, we will re-sent to you!
  3﹜For example, if shipping by DHL/UPS/FedEX/TNT/EMS..Express, if you buy the parts on jaunary 1, you will received the parts on Jaunary 15 before, becuase it takes 3-7 working days, if you not received the parts on Jaunary 15 before, please tell me we, we will re-sent to you!
  4﹜We WON'T resend any bounce back order due to incorrect shipping address

Payment Methodㄩ

   1﹜Accept paypal   --  Credit card through Paypal
   2﹜Accept Pay to bank of chian
   3﹜Accept wester union
       I will ship to the shown address on you PAYPAL Payment notice.
       Please confirm your shipping address in the PayPal Account
       or Please tell me your shipping address by Email,
       Please tell me you phone number
       Buyers need to absorb ALL re-shipments fee of returned packages

Return Policyㄩ

  1﹜100% money back guarantee or exchange the same class of the products.
  2﹜Full refund will be issued upon receipt of the Deffective Item.
  3﹜Please be advised that shipping and handling cost are not refundable.
  4﹜Buyers must be returned the defective products within 7 days from the date when product received.
  5﹜Refund or Replacement will be sent after we received your returning item.
  6﹜In all cases, buyers pay shipping at their own cost to return products for exchange or refund.

Shipping Scheduleㄩ

  1﹜Normally, Your order will be shipped within 1-2 our business days after the payment is cleared.
  2﹜The shipping time may vary, depends on receiver's location.

Item Declareㄩ

  1﹜Your item will mark as Gift or Sample and a low's value.
  2﹜We are NOT responsible for any import tax, customs fees or customs delay.
  3﹜Buyer cannot request to cancel the auction or request for refund under this situation. Please check with your local tax authorities BEFORE bidding.
  4﹜However, most of our items can reach to buyers without any taxes.


Shen Zhen QLS Elecrtonic TECHNOLOGY CO.,LTD.
ADD
ㄩHuiningge 13G,QianLong garden,Longhua,ShenZhen,GuangDong P.R.China.
Postalcodeㄩ 518131  TELㄩ+86-0755-28187975-602    FAXㄩ+86-0755-28187976
E-Mailㄩqls@cxqmcu.com