Welcome to Bowei Electronics£ºDevelopment board, Debugger, Programmer.

AVR JTAG ICE JTAGICE MKII Programmer / Debugger -- Support JTAG / ISP / Debugwire for 8bit and 32bit AVR

  Tis item is 100% compatible with Atmel's AT JTAGICE mkII, It supports AVR32 series of MCUs and can upgrade with avrstudio's upgrade tool.
  a powerful development tool for On-chip Debugging of all AVR 8-bit RISC MCUs and AVR32 32-bit DSP/MCUs with IEEE 1149.1 compliant JTAG interface.
  Combined with AVR Studio the JTAGICE mkII can do On-Chip Debugging on all AVR 8-bit RISC microcontrollers with JTAG Interface or debugWIRE Interface. Click here for a list of supported devices.


  The JTAG interface is a 4 wire Test Access Port (TAP) controller that is compliant with the IEEE 1149.1 standard. The IEEE standard was developed to enable a standard way to efficiently test circuit board connectivity (Boundary Scan). Atmel AVR devices have extended this functionality to include full Programming and On-Chip Debugging support.
  The JTAGICE mkII uses the standard JTAG interface to enable the user to do real time emulation of the microcontroller while it is running in the target system.
  The AVR On-Chip Debug (AVROCD) protocol gives the user complete control of the internal resources of the AVR microcontroller. Thus JTAGICE mkII gives accurate emulation at a fraction of the cost of traditional emulators.

  The debugWIRE interface adds a new way of doing On Chip Debug. The debugWIRE On-chip debug system uses a one-wire, bi-directional interface to control the program flow, execute AVR instructions in the CPU and to program the different non-volatile memories.
  When the debugWIRE Enable (DWEN) Fuse is programmed and Lock bits are un-programmed, the debugWIRE system within the target device is activated. The RESET port pin is configured as a wire-AND (open-drain) bi-directional I/O pin with pull-up enabled and becomes the communication gateway between target and emulator.
  Note that debugWIRE is a debugging interface only and not a programming interface.

  The JTAGICE mkII also supports full programming through the ISP interface. All JTAG and debugWIRE parts are supported. See Programming with JTAGICE mkII for more information.
  It works on either USB port or RS232 seriel port.

JTAGICE mkII features
  ¡óAVR Studio Compatible (AVR Studio 4.09 or later)
  ¡óSupports all AVR Devices with JTAG Interface
  ¡óSupports all AVR Devices with debugWIRE Interface
  ¡óSupports ISP programming of all JTAG and debugWIRE parts
  ¡óExact Electrical Characteristics
  ¡óEmulates Digital and Analog On-Chip Functions
  ¡óSoftware Breakpoints
  ¡óProgram Memory Breakpoints
  ¡óSupports Assembler and HLL Source Level Debugging
  ¡óProgramming Interface to flash, eeprom, fuses and lockbits (JTAG only)
  ¡óUSB 1.1 and RS232 Interface to PC for Programming and Control
  ¡óRegulated Power Supply for 9-12V DC Power
  ¡óCan be powered from the USB alone
  ¡óSame hardware for both interfaces (JTAG and debugWIRE)
  ¡óAuto firmware upgrade if there is new firmware available in future new AVR Studio software.

8-bit AVR:
  The JTAGICE mkII also support devices with debugWIRE Interface. debugWIRE enables on-chip debug of AVR microcontrollers in small pin count packages, using only a single wire for the debug interface.
  The AVR Studio online-help contains the most current information and a complete list of supported devices.
  Read more about AVR 8-bit RISC microcontrollers.

32-bit AVR32:
The JTAGICE mkII is supported by the AVR32 Studio.
Read more about AVR32 32-bit MCU/DSP.

Read AVR XMEGA from Atmel
More information,you can visit this url from atmel's JTAGICE mkII.

Support Device:
Mega Series:
ATmega16 ATmega162 ATmega32 ATmega64 ATmega128 ATmega169 ATmega169P
ATmega329 ATmega329P ATmega3290 ATmega3290P ATmega649 ATmega6490 ATmeg164P?
ATmega324P ATmega644P ATmega165 ATmega165P ATmega325 ATmega325P ATmega3250
ATmega3250P ATmega645 ATmega6450 ATmega640 ATmega1280 ATmega1281 ATmega2560
ATmega2561 ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
Xmega Series:
ATxmega128A1 ATxmega64A1 ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
Other Series:
AT90CAN32 AT90CAN64 AT90CAN128 AT90USB162 AT90USB646 AT90USB647 AT90USB1286
AT90USB1287 ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
Xmega Series:
ATxmega128A1 ATxmega64A1 ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
Other Series:
AT90CAN32 AT90CAN64 AT90CAN128 AT90USB162 AT90USB646 AT90USB647 AT90USB1286
AT90USB1287 ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
Mega Series:
ATmega48 ATmega48P ATmega88 ATmega88P ATmega168 ATmega168P ¡¡
Tiny Series:
ATtiny13 ATtiny2313 ATtiny24 ATtiny44 ATtiny84 ATtiny25 ATtiny45
ATtiny85 ATtiny261 ATtiny461 ATtiny861 ¡¡ ¡¡ ¡¡
Other Series:
AT90PWM3 AT90PWM3B AT90PWM2 AT90PWM2B AT90USB162 ¡¡ ¡¡

AT32AP7000 AT32AP7001 AT32AP7002 AT32UC3A0128 AT32UC3A0256 AT32UC3A0512 AT32UC3A1128
AT32UC3A1256 AT32UC3A1512 AT32UC3B0128 AT32UC3B0256 AT32UC3B064 AT32UC3B1128 AT32UC3B1256
AT32UC3B164 ¡¡ ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
  Support "L" or "V" Serirs Device, For example: ATmega16L¡¢ATmega48V
  Support Target Board VDD 2.1-5.5V
  The onboard firmware is upgradeable via AVRStudio IDE to support newly introduced devices.

Payment methods 1: Direct remittance to PAYPAL

AVR JTAG ICE JTAGICE MKII Programmer / Debugger + Registered Air Mail US $150.00    £¨About 15-25days£©

Procurement Description:
  Thank you for your order, please purchase product, tell us through the following E-mail:
  Your address, telephone number, contact person,
  My E-mail: qls@cxqmcu.com

Payment methods 2: My ebay shop --- http://stores.ebay.com/QLS-MCU-Development-TooL-Audio-DAC?_rdc=1

Payment methods 3:  BANK OF CHINA International Business:
  Remittance form:Remittance to our BANK OF CHINA account use U.S.dollars through local banks.
  Remittances cost:General remittances will be fixed at 25 dollars deducted, the total amount of remittances:The total amount of products + Shipping+ USD $25.00.
  The message witch provide to the local bank's:(To avoid making mistakes,You can put the following message to the bank staff,and ask he fill the forms for you )
  A/C NO£º4766938-0188-129144-0
  POST CODE£º518033

Hi, if we buy now, when you shipped to me ?
  1¡¢When we received you payment, we will sent the items to you within 1-2 work days !
You sent the items to me ,you have the tracking number for me ?
  1¡¢If Shipping by Registered Air Mail, We will send you by Registered Air mail, This is have tracking number, and it can takes 7-20 working days.
  2¡¢If Shipping by DHL/UPS/TNT/FedEx Express, We will send you by DHL/UPS/FedEX/TNT/EMS..Express, This is have provide Tracking number! and it can takes 3-7 working days !
If the item in the swap in the transport stolen, and you will be re-distributed to us?
  1¡¢If you buy the parts, within the prescribed time did not receive goods, we will re-sent to you.
  2¡¢For example, if shipping by Air Mail or Registered Air Mail, if you buy the parts on jaunary 1, you will received the parts on Jaunary 30 before, becuase it takes 7-20 working days, if you not received the parts on Jaunary 30 before, please tell me we, we will re-sent to you!
  3¡¢For example, if shipping by DHL/UPS/FedEX/TNT/EMS..Express, if you buy the parts on jaunary 1, you will received the parts on Jaunary 15 before, becuase it takes 3-7 working days, if you not received the parts on Jaunary 15 before, please tell we, we will re-sent to you!
  4¡¢We WON'T resend any bounce back order due to incorrect shipping address
Payment Method£º
   1¡¢Accept paypal  --  Credit card through Paypal
   2¡¢Accept Pay to bank of chian
   3¡¢Accept wester union
       I will ship to the shown address on you PAYPAL Payment notice.
       Please confirm your shipping address in the PayPal Account
       or Please tell me your shipping address by Email,
       Please tell me you phone number
       Buyers need to absorb ALL re-shipments fee of returned packages
Return Policy£º
  1¡¢100% money back guarantee or exchange the same class of the products.
  2¡¢Full refund will be issued upon receipt of the Deffective Item.
  3¡¢Please be advised that shipping and handling cost are not refundable.
  4¡¢Buyers must be returned the defective products within 7 days from the date when product received.
  5¡¢Refund or Replacement will be sent after we received your returning item.
  6¡¢In all cases, buyers pay shipping at their own cost to return products for exchange or refund.
Shipping Schedule£º
  1¡¢Normally, Your order will be shipped within 1-2 our business days after the payment is cleared.
  2¡¢The shipping time may vary, depends on receiver's location.
Item Declare£º
  1¡¢Your item will mark as Gift or Sample and a low's value.
  2¡¢We are NOT responsible for any import tax, customs fees or customs delay.
  3¡¢Buyer cannot request to cancel the auction or request for refund under this situation. Please check with your local tax authorities BEFORE bidding.
  4¡¢However, most of our items can reach to buyers without any taxes.

Shen Zhen QLS Elecrtonic TECHNOLOGY CO.,LTD.

ADD£ºHuiningge 13G,QianLong garden,Longhua,ShenZhen,GuangDong P.R.China.

Postalcode£º 518131

TEL£º+86-0755-28187975-602   FAX£º +86-0755-28187976