Mini2006 USB PIC Programmer for Microchip IC

   Mini2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.

   Mini2006 is applicable for almost all PIC10/12/16/18 series Microcontroller except 16C5X. It also supports memories in 24XX series and 93XX series.

Features of Mini QL-2006 Programmer：
   1.High performance-price ratio, designed with the updated PIC programming algorithm, higher speed than other similar products, stable performance, support more devices. Support online upgrade of programmer hardware, easy and convenient upgrade, USB Port, convenient for application on lap-top computer which doesn’t have serial port （convenient connection of one USB cable with computer）. Automatic programming function and automatic programming process enable mass production for customer’s great convenience （programming available on chip installation without pressing any other key）.
   2.Overall message indication, audio plus word will enable customer well informed about operating status.
   3.Through built-in ICSP interface, support ICSP （in-circuit serial programming） directly without any additional device. User may program after circuit board is welded. For FLASH Microcontroller, online upgrade is available.
   4.Equipped with 40pin DIP socket, available for direct programming of 8pin-40pin DIP chip. Programming of other surface mount device （SMD） is available based on universal adaptor.
   5.Compatible with operating systems （OS） including Windows98, Windows2000/NT and Windows XP ,Windows 2003, Windows Vista / WIN7.
   6. Function of programming counting, can preset and count the programming number.
   7.Function of serial number auto-increment, available to set auto-increment area as program area or EEPROM data area, set auto-increment system, set auto-increment start address/end address and auto-increment step, set to ignore high byte in auto-increment to avoid effect to RETLW instruction in auto-increment part of program
   8.Program supports load of *.HEX or *.BIN files, available to converse *.BIN files to *.HEX format.
   9.With programming data monitoring. Through check summing, available to find immediately if programming data is changed or not. Verification and formula are subject to definition of Microchip.
   10.Programmer hardware auto-search when start of software, no need for software setup before use, easier and more convenient operation.
   11.High programming success rate, enough programming depth. Programmable voltage, electrical parameter of programming and programming algorithm satisfy the technical specifications of manufacturers.

Software:
   Find file QL-PROGvXXen.EXE under root directory of CD, double click this file to access installation interface of application software, and operate according to prompts to finish the installation.Its shortcut will appear on desktop automatically after installation.
   After proper installation, shortcut of this software will appear on desktop. We can double click it to run the software. (Note: Run the software after proper connection of hardware so as to identify the hardware easily.)
   Interface after start of software is shown below:

Support device:

Tip: 16F57,16F59 Only use icsp mode

picture:

The auction includes：
  1). Mini2006 USB PIC Programmer * 1pcs
  2). USB Cable * 1pcs
  3). CD ROM or U Disk * 1pcs （QL-PROG soft; USB Driver; MPLAB IDE; English versions of user manuals..）