|
﹛ |
|
QLdsPIC3 -- PIC 16bit
Microcontroller Development Board |
|
﹛ |
 |
The QLdsPIC3 development
board is an experimental development board
designed by QLS Electronic by integrating its
main characteristic function module based on
variety of 16-bit microcontroller DEMO boards
home and aboard, the main circuit of which
origins from the standard DEMO board and
reference application circuit of MICROCHIP Co.
The design of board resource is completely open
which can be flexibly extended, is a good
assistant for mass of engineers to deal with the
16-bit MICROCHIP microcontroller software and
hardware design.
The QLdsPIC3 development
board supports PIC24FJ96GA008 and other chips
compatible with pin, and the chip module can be
changed.
The QLdsPIC3 development
board supports dsPIC30F6014A and other chips
compatible with pin, and the chip module can be
changed.
The QLdsPIC3 development
board supports dsPIC33FJ128GP708 and other chips
compatible with pin, and the chip module can be
changed.
|
|
|
|
On-board resourcesㄩ |
 |
 |
 |
| RS-485 and RS-422
communication module 6-pin terminal block and configuration
jumper (use DuPont wire can be connected to the arbitrary I/O
port) |
Ethernet module每 by
Microchip's ENC28J60, 10BASE-T stand alone Ethernet Controller.
(use DuPont wire can be connected to the arbitrary I/O port) |
Si3000 Voiceband Codec
with MIC In/Speaker Jacks 每 Jumper for selection of Si3000 Codec
mode (Master/Slave) (use DuPont wire can be connected to the
arbitrary I/O port) |
 |
 |
 |
| MMC\SD card slot - For MMC\SD
memory cards. Used for data acquisition. (use DuPont wire can be
connected to the arbitrary I/O port) (remark: MMC\SD card is
optional). |
Power module Separate on-board
+5V and +3.3V regulators for VDD and AVDD with direct input from
9V, AC/DC wall adapter, 9V DC power source input jack for
development, LED power-on indicator |
Real Time Clock by PCF8583 with
battery supply. (use DuPont wire can be connected to the
arbitrary I/O port) |
 |
 |
 |
| RS-232 communication A(Include
RTS/CTS) for connection with a PC or any other device with a DB9
connector. (use DuPont wire can be connected to the arbitrary
I/O port) |
RS-232 communication B for
connection with a PC or any other device with a DB9
connector.(use DuPont wire can be connected to the arbitrary I/O
port) |
Single CAN communication channel
by MCP2551 (use DuPont wire can be connected to the arbitrary
I/O port) |
 |
 |
 |
| 3xPotentionmeters for simulating
analog voltage input..(use DuPont wire can be connected to the
arbitrary I/O port) |
8-buttons are provided每for easy
various key-press input experiments and jumper setup for pull-up
or pull-down of port hardware.(use DuPont wire can be connected
to the arbitrary I/O port) |
Digital thermometer DS1820 for
measuring temperature from -55oC to 125oC.(use DuPont wire can
be connected to the arbitrary I/O port) (remarkㄩ chip DS18B20 is
optional). |
 |
 |
 |
| Program or Debug connector Port
for 每 to directly connect ICD2/MCD2/ICD3/PICKIT2 for the board
target chip program or debug |
8 LEDs are provided. 每
t(use DuPont wire can be connected to the arbitrary I/O port) |
PS2 connector makes direct
connection between QLdsPIC3 and PC keyboard. |
 |
 |
 |
| User Target chip socket |
16*2-character LCD每internal 5*7
lattices, to display 16*2-character.(use DuPont wire can be
connected to the arbitrary I/O port) |
128*64- Graphic LCD每128*64
lattices.(use DuPont wire can be connected to the arbitrary I/O
port) |
|
 |
Characteristics:
Open modular designㄩ All modules can be on/off controlled by DIP
switch. Each module is designed to
connect to I/O port of Microcontroller.
Connection of module with any port of
Microcontroller is conveniently achieved
through dupont thread. Connection to
preset port is available by using DIP
switch without dupont thread. All I/O
ports are open externally with output
socket. Expansion is easily
accomplished.
On-board simulation debugging and Programmer interface: direct
connection to ICD2/ICD3/MCD2/PICKIT2.
The master controller is in independent design and it's easy to change.s
Preprogrammed
dsPIC30F6014A Plug-in Module, VDD =5V, Crystal for
10Mhz, On each corner of the card there is one
electrolytic capacitor for stable power supply |
|
 |
 |
Preprogrammed
PIC24FJ96GA008 Plug-in Module, VDD =3.3V,Please set VDD
jump for 3.3V, Crystal for 10Mhz, On each corner of the
card there is one electrolytic capacitor for stable
power supply..
(remarkㄩPIC24FJ96GA008 Chip Module
is optional, Price is $25.00). |
Preprogrammed
dsPIC33FJ128GP708 Plug-in Module, VDD =3.3V,Please set
VDD jump for 3.3V, Crystal for 10Mhz, On each corner of
the card there is one electrolytic capacitor for stable
power supply...
(remarkㄩdsPIC33FJ128GP708 Chip
Module is optional, Price is $25.00). |
|
|
|
 |
|
Sample with C30 Program sources code as below (using
dsPIC30F6014):
☉8x LED
☉RS232 Communication
☉RS485 Communication
☉Can Communication
☉PS2
☉Real time clock
☉Si3000 Voiceband Codec
☉DS1820
☉MMC\SD card Read/Write
☉128x64 LCD
☉1602 LCD
☉Key-press
☉A/D converter
|
|
Related Downloads: QLdsPIC3 User's Manualㄩ
http://www.pic16.com/soft/dspic3_user_v2_en.pdf |
|
|
The auction includes:
1. QLdsPIC3 Delelopment Board ( Include one dsPIC30F6014A chip
module,16*2;128*64 LCD ) *1
2. RJ45 LAN Cable *1
3. RJ12 to RJ12 ICSP cable *1
4. Dupont thread expansion connection (20 wire) *1
5. DC power adapter ( input: AC110-240V 50/60Hz, output: DC9V 1000mA ) *1
6. CD-ROM or U Disk *1(English version PDF User manual, PCB
Board Layout PDF, Schematic PDF, Sample code(C30),MPLAB IDE, Chip's
Datasheet) |
|
Main control board can
arbitrarily choose one, please E-mail to me, otherwise standard
(dspic30F6014A) to send the goods. Thank you cooperation! |
|
|
|
Procurement
Description:
Thank you for your order, please purchase product, tell us through the
following E-mail:
Your address, telephone number, contact person,
My E-mail: qls@cxqmcu.com
|
|
|
Payment methods 2:
My ebay shop ---
http://stores.ebay.com/QLS-MCU-Development-TooL-Audio-DAC?_rdc=1 |
|
|
Payment methods 3:
BANK OF CHINA International Business:
Remittance form: Remittance to our BANK OF CHINA account use U.S. dollars
through local banks.
Remittances cost: General remittances will be fixed at 25 dollars
deducted, the total amount of remittances: The total amount of
products + Shipping+ USD $25.00.
The message witch provide to the local bank's: (To avoid making
mistakes, You can put the following message to the bank staff, and ask
he fill the forms for you )
A/C NOㄩ4766938-0188-129144-0
IN A/C WITHㄩ TANG YAN
BENE＆S BANKㄩ BANK OF
CHINA SHENZHEN BEI FANG BUILDING SUB-BRANCH
SWIFT CODEㄩBKCHCNBJ45A
ADDㄩ 1/F,BEI FANG
BUILDING, SHEN NAN ZHONG ROAD, SHENZHEN, CHINA
POST CODEㄩ 518033
|
|
|
FAQ
|
|
Hi, if we buy now,
when you shipped to me ? |
|
1﹜When we received you payment, we
will sent the items to you within 1-2 work days ! |
|
You sent the items to
me ,you have the tracking number for me ? |
|
1﹜If Shipping by Registered Air
Mail, We will send you by Registered Air mail, This is have
tracking number, and it can takes 7-20 working days.
2﹜If Shipping by DHL/UPS/TNT/FedEx Express, We will send you by
DHL / UPS / FedEX / TNT / EMS.. Express, This is have provide
Tracking number! and it can takes 3-7 working days ! |
|
If the item in the
swap in the transport stolen, and you will be re-distributed
to us? |
|
1﹜If you buy the parts, within the
prescribed time did not receive goods, we will re-sent to
you.
2﹜For example, if shipping by Air Mail or Registered Air Mail, if you buy
the parts on jaunary 1, you will received the parts on
Jaunary 30 before, becuase it takes 7-20 working days, if
you not received the parts on Jaunary 30 before, please tell
me we, we will re-sent to you!
3﹜For example, if shipping by DHL/UPS/ FedEX / TNT/EMS.. Express, if you buy
the parts on jaunary 1, you will received the parts on
Jaunary 15 before, becuase it takes 3-7 working days, if you
not received the parts on Jaunary 15 before, please tell me
we, we will re-sent to you!
4﹜We WON'T resend any bounce back order due to incorrect shipping address
|
|
Payment Methodㄩ |
|
1﹜Accept paypal --
Credit card through Paypal
2﹜Accept Pay to bank of chian
3﹜Accept wester union
I will ship to the shown address on you
PAYPAL Payment notice.
Please confirm your shipping address in the
PayPal Account
or Please tell me your shipping address by
Email,
Please tell me you phone number
Buyers need to absorb ALL re-shipments fee
of returned packages |
|
Return Policyㄩ |
|
1﹜100% money back guarantee or
exchange the same class of the products.
2﹜Full refund will be issued upon receipt of the Deffective Item.
3﹜Please be advised that shipping and handling cost are not refundable.
4﹜Buyers must be returned the defective products within 7 days from the
date when product received.
5﹜Refund or Replacement will be sent after we received your returning
item.
6﹜In all cases, buyers pay shipping at their own cost to return products
for exchange or refund. |
|
Shipping Scheduleㄩ |
|
1﹜Normally, Your order will be
shipped within 1-2 our business days after the payment is
cleared.
2﹜The shipping time may vary, depends on receiver's location. |
|
Item Declareㄩ |
|
1﹜Your item will mark as Gift or
Sample and a low's value.
2﹜We are NOT responsible for any import tax, customs fees or customs
delay.
3﹜Buyer cannot request to cancel the auction or request for refund under
this situation. Please check with your local tax authorities
BEFORE bidding.
4﹜However, most of our items can reach to buyers without any taxes. |
|
|
|
Shen Zhen QLS Elecrtonic TECHNOLOGY
CO., LTD.
ADDㄩ Hui ning ge 13G,QianLong garden, Long hua, Shen Zhen, Guang Dong
P. R. China.
Postal codeㄩ 518131 TELㄩ+86-0755-28187975-602
FAXㄩ+86-0755-28187976
E-Mailㄩ qls@cxqmcu.com |
| |
