|
﹛ |
|
MCD-DEMO2 PIC 16F87X Microcontroller Development Board |
|
------ Ideal for the Student or Hobbyist to start developing and testing
your PIC projects with this multi-featured and flexiable PIC Development
board. |
 |
|
|
PIC 16F87X Development
board |
|
1). 8 indicator LEDS
2). ICD2 Header connector for programming / Debugging with Microchips
ICD2
3). 16x2 LCD Character display
4). 6 Seven segment display
5). RS232 Serial communication port
6) 16 button matrix Keypad
7). Stepp motor slot
8). 4 push buttons
9). Infrared reception
10). DB9 connector and RS232 Transeiver (for serial Comms)
11). I2C Serial EEprom 24c01B - dipswitch used for write enable and
setting device address (on supported eeproms)
12). 2 pin sockect for main Osc (4MHz resonator -Default) allows for easy
changing of the main Osc frequency. Provion for loading caps if using a
crystal.
13). Buzzer
14). Reset switch
15). Uncommited PIC I/O ports - So the PIC's I/O lines may be connected
to any of the onboard modules or external circuits
|
|
|
On-board resources: |
 |
 |
 |
 |
| 4*4 Matrix
keyboard 每 to test password lock and other items.s. |
Buzzer
voice/PWM output experiment 每 to practice normal voice, music
and PWM output sound. |
5-way
independent key-press每for easy various key-press input
experiments. |
RS-232
communication for connection with a PC or any other device with
a DB9 connector |
 |
 |
 |
 |
| Infrared
remote-control receiver 每 to practice infrared remote-control
decoding and all kinds of infrared remote control. |
All I / O
output to facilitate expansion |
IIC (I2C)
communication 每 to read/write 24CXX series chips with hardware
IIC or software IIC directly. |
SPI
communication每to read/write EEPROM of 93CXX with hardware SPI or
software analog SPI,to select 8-bit or 16-bit read/write method
through jumper. |
 |
 |
 |
 |
| Clock
selection 每 jumper for switch between various oscillation modes,
to replace crystal vibration of different frequency as required
by development of product. |
DS18B20
digital temperature sensor 每 1-wire bus communication, wide
range for temperature measurement, high accuracy and sensitivity
(remark: chip DS18B20 is optional). |
Stepper motor
driver circuit(remark: Setpper motor is optional). |
Simulation
debugging interface 每 to directly connect ICD1/ICD2/MCD1/MCD2
and carry out on-line simulation for on-board chips and
resources |
 |
 |
 |
 |
| On-board power
module 每 can connect to the polarity of external AC or DC power
supply optionally, voltage range 7-12V |
mcu / mpu
reset key |
1-way A/D
converter signal input. |
8-way
independent LED |
|
 |
 |
 |
|
12864-character LCD每128*64 lattices.(remark:12864- character LCD
is optional). |
1602-character LCD每internal 5*7 lattices, to display
16*2-character. |
6-bit
7-segment digital tube 每 to realize dynamic or static display
experiment of digital tube, to display clock,temperature or to
make counter. |
|
 |
 |
 |
|
12864 character LCD is optional |
Setpper motor is optional |
﹛ |
|
|
|
Sample with C and ASM Program sources code as below
(using pic16f877a)
☉DS1820
☉Buzzer
☉128x64 GLCD (See the following Photos)
☉1602 LCD (See the following Photos)
☉93C46
☉24C02
☉4x4 Key testing
☉8x LED
☉7x segment
☉ADC
☉Infrared Remote
☉stepp motor
Weight : 900g
Package Size: 290mm * 220mm * 80mm |
|
|
The auction includes:
1).MCD-DEMO2 16F87X PIC Microcontroller Development Board
2).Serial cable
3).RJ12 Connection Cable.
4).16F877A Chip
5).1602 LCD with Yellow backlight
6).Power supply(110-240 AC TO 9V DC)
7).CD-ROM or U Disk (Programmer Driver , English version PDF
User manual ,QL200 Layout,QL200 Board Schematic , Sample code (C / ASM)
, MPLAB 7.50 .)Compatible for OS including Windows 98, Windows 2000/NT,
Windows XP , Windows 2003 and Vista. |
|
|
|
Procurement
Description:
Thank you for your order, please purchase product, tell us through the
following E-mail:
Your address, telephone number, contact person,
My E-mail: qls@cxqmcu.com
|
|
Payment methods 2:
My ebay shop ---
http://stores.ebay.com/QLS-MCU-Development-TooL-Audio-DAC?_rdc=1 |
|
|
Payment methods 3:
BANK OF CHINA International Business:
Remittance form:Remittance to our BANK OF CHINA account use U.S.dollars
through local banks.
Remittances cost:General remittances will be fixed at 25 dollars
deducted, the total amount of remittances:The total amount of
products + Shipping+ USD $25.00.
The message witch provide to the local bank's:(To avoid making
mistakes,You can put the following message to the bank staff,and ask
he fill the forms for you )
A/C NOㄩ4766938-0188-129144-0
IN A/C WITHㄩTANG YAN
BENE＆S BANKㄩBANK OF
CHINA SHENZHEN BEI FANG BUILDING SUB-BRANCH
SWIFT CODEㄩBKCHCNBJ45A
ADDㄩ1/F,BEI FANG
BUILDING,SHEN NAN ZHONG ROAD,SHENZHEN,CHINA
POST CODEㄩ518033
|
|
|
FAQ
|
|
Hi, if we buy now,
when you shipped to me ? |
|
1﹜When we received you payment, we
will sent the items to you within 1-2 work days ! |
|
You sent the items to
me ,you have the tracking number for me ? |
|
1﹜If Shipping by Registered Air
Mail, We will send you by Registered Air mail, This is have
tracking number, and it can takes 7-20 working days.
2﹜If Shipping by DHL/UPS/TNT/FedEx Express, We will send you by
DHL/UPS/FedEX/TNT/EMS..Express, This is have provide
Tracking number! and it can takes 3-7 working days ! |
|
If the item in the
swap in the transport stolen, and you will be re-distributed
to us? |
|
1﹜If you buy the parts, within the
prescribed time did not receive goods, we will re-sent to
you.
2﹜For example, if shipping by Air Mail or Registered Air Mail, if you buy
the parts on jaunary 1, you will received the parts on
Jaunary 30 before, becuase it takes 7-20 working days, if
you not received the parts on Jaunary 30 before, please tell
me we, we will re-sent to you!
3﹜For example, if shipping by DHL/UPS/FedEX/TNT/EMS..Express, if you buy
the parts on jaunary 1, you will received the parts on
Jaunary 15 before, becuase it takes 3-7 working days, if you
not received the parts on Jaunary 15 before, please tell me
we, we will re-sent to you!
4﹜We WON'T resend any bounce back order due to incorrect shipping address
|
|
Payment Methodㄩ |
|
1﹜Accept paypal --
Credit card through Paypal
2﹜Accept Pay to bank of chian
3﹜Accept wester union
I will ship to the shown address on you
PAYPAL Payment notice.
Please confirm your shipping address in the
PayPal Account
or Please tell me your shipping address by
Email,
Please tell me you phone number
Buyers need to absorb ALL re-shipments fee
of returned packages |
|
Return Policyㄩ |
|
1﹜100% money back guarantee or
exchange the same class of the products.
2﹜Full refund will be issued upon receipt of the Deffective Item.
3﹜Please be advised that shipping and handling cost are not refundable.
4﹜Buyers must be returned the defective products within 7 days from the
date when product received.
5﹜Refund or Replacement will be sent after we received your returning
item.
6﹜In all cases, buyers pay shipping at their own cost to return products
for exchange or refund. |
|
Shipping Scheduleㄩ |
|
1﹜Normally, Your order will be
shipped within 1-2 our business days after the payment is
cleared.
2﹜The shipping time may vary, depends on receiver's location. |
|
Item Declareㄩ |
|
1﹜Your item will mark as Gift or
Sample and a low's value.
2﹜We are NOT responsible for any import tax, customs fees or customs
delay.
3﹜Buyer cannot request to cancel the auction or request for refund under
this situation. Please check with your local tax authorities
BEFORE bidding.
4﹜However, most of our items can reach to buyers without any taxes. |
|
|
|
Shen Zhen QLS Elecrtonic TECHNOLOGY
CO.,LTD.
ADDㄩHuiningge 13G,QianLong garden,Longhua,ShenZhen,GuangDong
P.R.China.
Postalcodeㄩ 518131 TELㄩ+86-0755-28187975-602
FAXㄩ+86-0755-28187976
E-Mailㄩqls@cxqmcu.com |
| |
