STK48+ ATMEL AVR ATMEGA48 Development Board
--8 LEDs are provided.
--8 buttons are provided.
--Reset buttons.
--1 * RS-232 communication for connection with a PC or any other device with a DB9 connector
--External power supply Input (DC 5V Input), VCC can select 5V or 3.3V,
--All pins are taken out on IDC connectors to make them available for further connections.
--ISP Port

ATMEL AVR ATMEGA16L Microcontroller Development Board kit - EasyAVR M16 SK
EasyAVR M16 SK is a system produce by AVR study and product development, Rich in resources, JTAGICE emulator and ISP downloader on board, it’s a perfect tool for your AVR mcu study.

STK500 AVR ISP Programmer + TQFP64 Programmer Adapter
1). AVR ISP2.0 STK500 Programmer communicates with PC vai USB port, and it works with most of PC & notebook computers.
2). USB connect chip FT232RL, Ensure stable performance.
3). It can supports a wide range of ATMEL AVR microcontrollor.
4). It can works with AVR Studio or WINAVR (GCC).
5). TQFP64 Programmer Adapter

USB AVR JTAGICE V2.0 Programmer / Debugger for ATMEL IC
1).AVRJATG ICE V2.0 Programmer / Debugger communicates with PC vai USB port, and it works with most of PC / notebook computers.
2).it can supports a wide range of ATMEL AVR microcontrollor.
3).it can works with AVR Studio
4).It works with ATMEL AVR Studio 4.13, you can upgraded it's firmware,in upgrade firmware Completed,it can work at a higher version of the AVR Studio and to be able to support more device,
5).Dramatically Reduce Program Development and Testing Time
6).Single Step Through your Program and Monitor Register Values
7).Set Breakpoints and Watch Values
8).Compact Size - 75mm x 57mm x 27mm

ATMEL ATmega16 / ATmega32 / ATmega8535 AVR Development Board
1). 8 LEDs are provided.
2). 8 buttons are provided.
3). Reset buttons.
4). 1 * RS-232 communication for connection with a PC or any other device with a DB9 connector
5). External power supply Input (DC 5V Input), VCC can select 5V or 3.3V.
6). All pins are taken out on IDC connectors to make them available for further connections.
7). ISP Port
8). JATG Port
9). HV PROGRAMMER Port
10). Clock selection – jumper for switch between various oscillation modes, to replace crystal vibration of different frequency as required by development of product.
11). Also can support ATMEGA16 / ATMEGA32 / ATMEGA8535.

AVR JTAG ICE JTAGICE MKII Programmer / Debugger
Tis item is 100% compatible with Atmel's AT JTAGICE mkII, It supports AVR32 series of MCUs and can upgrade with avrstudio's upgrade tool.
a powerful development tool for On-chip Debugging of all AVR 8-bit RISC MCUs and AVR32 32-bit DSP/MCUs with IEEE 1149.1 compliant JTAG interface.
Combined with AVR Studio the JTAGICE mkII can do On-Chip Debugging on all AVR 8-bit RISC microcontrollers with JTAG Interface or debugWIRE Interface. Click here for a list of supported devices.

ATMEL AVR ATMEGA128(L) AVR Development Board
2 * RS-232 communication for connection with a PC or any other device with a DB9 connector
External power supply Input (DC 5V Input), VCC can select 5V or 3.3V,
All pins are taken out on IDC connectors to make them available for further connections.

AVR AVRISP STK500 V2.0 USB ISP Programmer for ATmel IC
1). AVR ISP2.0 STK500 programmer communicates with PC vai USB port, and it works with most of PC & notebook computers.
2). USB connect chip FT232RL, Ensure stable performance.
3). It can supports a wide range of ATMEL AVR microcontrollor.

AVR AVRISP2 MK2 / MKII USB ISP Programmer for ATmel IC
Supported software:
- Direct support AVRStudio, WINAVR (GCC);
- Support for IAR, ICCAVR, CVAVR and other documents generated by the programming;
Support firmware upgrade:
- Support for automatic firmware upgrades;
- Support the new AVR Studio version of the future supported by new models chip;